ANENG ST211 Digital Clamp-On Current Multimeter 6000 Counts True RMS Large Color Display Intelligent Manual Automatic In

Features 1 With Aneng automatic scanning mode When the device is turned on it enters the automatic scanning state When the device detects current DC voltage voltage and resistance it will automatically switch the corresponding functions 2 Alternating current the value of alternating current that can be measured without exposed conductors 3 Equipped with NCV sensor When AC voltage is detected the red light turns on and the buzzer sounds 4 With flashlight design it can still work normally even in dark environments 5 Large Color Screen 3 Line DisplayInstructions Neutral line Press the SEL key to switch to the zero line position only connect the red pen there is no response it is the zero line FireWire Press the SEL key to switch to the zero line position the red light flashes and a buzzer alarms Temperature Press the SEL key to switch to temperature mode and contact the thermocouple with the measured object Diode Press the SEL key to switch to the diode position the redis aligned with the positive pole and the blackis aligned with the negative pole Specifications TypeANENG ST211AC current400ADC voltage600VAC voltage600VResistance6OOMΩCapacitor60 00mFTemperature 40 1000°C 40 1832°FFrequency60 0Hz 1000HzDIODE1VNCV√Live√AC voltage measurement√Line on cff test1ΩAutomatic identification√Automatic measurement√Overload protection√Operating heightMax 2000mDisplayLCDMax display value6000 digitPolarity indicationAutomatic indication and