AK-K210605 /433MHz 4 Buttons Learning Code Copy Remote Controller, Red, 501 Original

AK-K210605 Universal Copy Remote Controller 4 Buttons Electric Garage Gate Door Opener Duplicator Clone Cloning Learning Code Car KeyFeature:LED indicator light: eye-catching working indicator light, the operating status is clear at a glance.Hard rubber keys: Hard rubber frosted key surface design, the touch feel is crisp and clean, and the feedback is clear.Colorful frame: The slim body is equipped with a colorful frame, which has a fashionable look.Round and slender: as round as pebbles.Specification:Product Name: Four Button Remote Control for Wireless CopyProduct model: AK-K210605Product color: White Black, White Red (optional)Working frequency: 315 MHz / 433.92 MHz (optional)Power supply scheme: DC6V (button battery CR2016*2) power supplyStandby current: Less than 0.1uA;Temperature range: -20 - 70℃, it can work normally even in harsh environmental temperatureRated voltage: DC6VEmission current: 11mAQuiescent current: 30m (measured in an open outdoor area)Transmitting frequency: 315MHz/433.92MHzProduct size: 62.3x37.2x10.7mm/2.45x1.46x0.42in (including shell)Product weight: 21.20g (including shell)Overview:AK-K210605 white shell four-key copy remote control adopts 12F683 main control chip, supports online programming, and can be programmed repeatedly.Built-in EEPROM, can copy other common remote controllers with the same frequency, can clear codes and learn codes at any time, easy and fast to use, and can be used in automobile remote control, lighting control, smart home remote control and other fields.Function description:(1) Copy code operation:If the remote control has checked the code, the code must be cleared before the code can be checked.Code matching operation: press the single button of the copied remote control and the copy remote control at the same time, until the copy remote control indicator light flashes from fast to steady to indicate that the code is successfully matched, you can release the two remote control buttons.The other keys are also operated in sequence according to this method until all keys are copied.(2) Clear code operation:Press and hold the two buttons on the top of the copy remote control (the two buttons near the indicator light) at the same time until the indicator light flashes quickly, and then short press one of the two buttons on the top three times to clear the code (the other button is kept pressed during this process).(3) Recovery code operation:Press and hold the two buttons under the copy remote control at the same time until the indicator light flashes quickly, you can restore the remote control code that was cleared before.Matters needing attention:The working voltage cannot exceed the rated voltage.In an environment with high wireless interference, the transmission distance may be reduced.Keep out of reach of children.It is forbidden to use it in a humid environment, otherwise it may cause damage to the remote control.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 X Remote Control