AK-GK03A 1 Channel Remote Control Switch Learning Lode Wireless Receiver + Control Panel AC 85-250V

Overview: Wide voltage multi-function single-channel high-power remote control switch adopts 10A relay, which can load larger power appliances; learning type single-chip decoding, can learn multiple remote controllers, and all keys of each remote control can be learned; can be controlled by a remote controller Multiple switches can also control one switch by multiple remote controllers. The operation is simple and flexible. Any combination of output modes can be switched by jump, jog, self-lock and interlock. It is easy to use and suitable for multiple fields. Uses; mainly used in lamps, electric doors, windows, lifting equipment, motor control, water pump, lift control and security industry. Technical Parameters: Working voltage: AC85-250V/DC15-120V Operating frequency: 315MHz / 433 MHz Standby current: 10mA Load: less than 1000W Working mode: self-locking, jogging, interlocking Shell size: 98x44x27.5mm PCB size; 67x38x16.5mm Instructions: 1. Learning method: Press the learning button, the indicator light is off (indicating that it has entered the learning state) release the learning button, press any button on the remote control, the indicator light flashes four times and the light is always on to indicate that the learning is successful. Note: This controller can learn 20 remote codes of fixed code/learning code and other keys, and the remote control will remove the earliest learned remote control. 2. Clear method: Press and hold the learning button for about 4 seconds. The indicator will turn off and return to light. 3. Work mode switching: Switch the working mode by short circuiting and shorting different places. 1, jog - short circuit vacant 2, self-locking - short circuit connection T.M 3, interlock - short circuit to take over M.L 4. Explanation of the meaning of self-locking/interlocking/jogging: Interlock: Press the corresponding button of the remote control, the corresponding relay is turned on, and then press another remote control button; the relay is disconnected. Non-lock, jog: Press the remote control button, the corresponding relay is turned on, release the remote control button; the corresponding relay is disconnected. Self-locking: Press the remote control button once, the relay is turned on, press the remote control button again, the relay is disconnected. Package Included: 1 x 1 Channel Remote Control Switch 1 x Control Panel