AD584 Voltage Module 4-Channel Work on 2.5V/7.5V/5V/10V 1 Pack

AD584 Voltage Module 4-Channel Work on 2.5V/7.5V/5V/10V 1 Pack
sku: 2767265026
$22.40
Shipping from: United States
   Description
AD584 is an eight-pin voltage reference a programmable four common output voltages: 10.000 V 7.500 V 5.000 V and 2.500 V. The device uses wafer trimming technology to adjust the pin-programmable output levels and temperature coefficients so as to obtain the flexible single-chip high- reference voltage source. AD584 is recommended as an external reference voltage source of 12 or 14 bit digital to analog (DAC) / analog to digital () converter reference voltage source and performance is usually the standard stand-alone reference. Onboard 15V battery we know the battery is the lowest noise so it can output pristine stable voltage to a reliable. The board has four programming terminals each corresponding to an output voltage short circuit by short-circuiting the corresponding terminal block to give the corresponding voltage. Because the AD584 programming pins in programming short resistance will affect the output voltage in order to reduce the short-circuit resistance two terminals in parallel. Alternative switch terminal advantage are more reliable and flexible short-circuit resistance can be smaller. Temperature coefficient: 5 ppm / Celsius (maximum 0 Celsius to 70 Celsius AD584L) 15 ppm / Celsius (maximum -55 Celsius to + 125 Celsius AD584T) Consumption: Static current: 1 mA (max) low quiescent current is perfect for battery-powered. Load capacity: 10 mA Operating voltage: 4.5V to 30V note the required operating voltage higher than the programmed output voltage Temperature range: AD584J / K / L rated operating temperature range of 0 Celsius to + 70 Celsius AD584S / T with -55 Celsius to + 125 Celsius. The external supply interface you need more than 11V The reference voltage output interface with copper 2mm test socket for easy card into the pen multimeter to measure or calibrate other instruments. Each board at the factory to be detected with Aglient 6 digit multimeter and marked with the output voltage user-. Before detect multimeter and board warm-up at least 30 minutes at room temperature 25 degrees to the detection accuracy. The following are six and a half Agilent multimeter measured 2.5V voltage output effect 2.49978V and standard error is small. Colour: yellow Material: metal Package Contents: 1 * Reference Module (different batches some parts may be different in color which will not affect the ) Only the above package content other products are not included. Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.
   Price history chart & currency exchange rate

Customers also viewed