ABZ Encoder Motor Reducer Equipment Aluminum With High Performance For Machining Center C38S6G5-2000Z-G24N

ABZ Encoder Motor Reducer Equipment Aluminum with High Performance for Machining Center C38S6G5-2000Z-G24N Specification: Item Type: ABZ Encoder Material: Aluminum + plastic Model: C38S6G5 Power Supply Voltage: DC5-24V Current Consumption: 30mA Mechanical Speed: 6000rpm Shaft Diameter Size: Approx. 6mm / 0.2in 8mm / 0.3in 10mm / 0.4in Number of Phases: ABZ 3 phase Package List: 1 x Encoder Note: 1. This product is composed of accurate components so please be careful not to drop it 2. When installing if the eccentricity or deviation angle is too large it will shorten its service life 3. Do not use in strong impact vibration corrosive large field high temperature high humidity and acid-base environment 4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on there is a 0.5S delay time for use 5. After the product is fixed do not pull the cable with a force exceeding 29.4N 6. When there is a high-voltage line or power line nearby please use a conduit to cover the cable 7. When wiring pay attention not to short-circuit the terminals and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals. 8. Shielded wire should be grounded 9. Do not disassemble the product by yourself