868MHz-915MHz SX1276 ESP32 LoRa 0.96 Inch Blue OLED Display Bluetooth WIFI Lora Kit 32 Module IOT Development Board For Arduino

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). This product is based on the WIFI Kit 32 added SX1276 chip, that is, LoRa remote modem, Applicable frequency:8 68MHz and 915MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability, transmission distance (measured open area communication distance 2.6Km). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development. Technical Parameters: Dominant Frequency: 240MHZ Flash: 32M-Bits Processor: for Tensilica LX6 Dual Core Master chip: ESP32 LoRa chip: SX1276 Support frequency band: 868-915MHZ Open communication distance: 2.8KM Computing capacity: up to 600DMIPS Dual-mode Bluetooth: traditional Bluetooth and BLE low-power Bluetooth Development environment: perfect support for Arduino Operating voltage: 3.3-7V Operating temperature range: -40-90 Receiver sensitivity: -139dBm (SF12, 125KHZ) UDP continuous throughput: 135Mbps USB adapter chip: CP2102 Support mode: Sniffer, Station, softAP and Wi-Fi Direct Transmit power: 19.5dBm@11b, 16.5dBm@11g, 15.5dBm@11n Data rate: 150Mbps @ 11n HT40, 72Mbps @ 11n HT20, 54Mbps @ 11g, 11Mbps @ 11b Note: this item do not have the Lithium battery and antenna. Package included: 1 x SX1276 ESP32 Module