8 WS2812 RGB LED lights NightLight Hat Board For Raspberry Pi

Descriptions: NightLight Hat Board For Raspberry Pi is a Hat Board which have 8 WS2812 RGB LED lights. And this Hat Board will communicate with Raspberry Pi via I2C protocol. You can control each LED's color individually by command. At the same time, you can also adjust the brightness of each LED by command. The light board is connected to the GPIO pin by HAT. You can stack multiple identical boards in a layered manner, which can make your lighting more layered. It is recommended not to exceed four layers at most. Otherwise, the power supply may be insufficient. Because all the lights need to be powered from the GPIO pin of the Raspberry Pi. The feature of the HAT board is that you don't have to worry about messy cables. If you only use one layer of light board, you can engrave your favorite pattern on an acrylic board with a laser engraving machine, and then insert it vertically into the random acrylic bracket, so that by controlling the light, you can make different The acrylic art board presents a different brilliance, turning your light board into a work of art. Features: Easy to setup WS2812 RGB LEDs Extend the GPIO Pins Can be mounted on top of the stack Can Stack with other Stack board such as Relay module Individual control of each Light With beautiful acrylic light guide,Two factory-made patterns, two of them are blank for you DIY Plug and Play One command control Multiple Programming Language support such as shell, python, C/C++ and so on User Manual for more info. Package Included: 1 x NightLight Hat Board For Raspberry Pi 4 x M2.5x12 copper sticks 4 x M2.5x6 screws (Botton) 4 x M2.5x10 screws (Top) 1 x Acrylic Pattern Design (Stander) 4 x Acrylic Pattern Design (2x Caved and 2x blank)