60cm Tile Cutter Manual Tile Cutter Ceramic Porcelain Cutting Machine W/ Ruler for Wall Tiles Groove Tiles Raised Tiles Patterned Tiles Flat Tiles

Description: A manual tile cutter is a commonly used cutting tool in construction. The reinforced tungsten alloy cutting wheel can ensure efficient cutting. Simply apply appropriate pressure on the handle to push the cutting wheel into the tile for cutting. Compared to electric tile machines manual tile machines are compact and easy to operate making them suitable for cutting a wide range of tiles. Efficient&Precise Cutting: The reinforced tungsten alloy cutting wheel with high hardness can ensure smooth and flat cutting without burrs making the joints more beautiful to save decoration costs with an efficiency of 5-10 times higher than an electric cutting machine. Meanwhile the embedded collimator with infrared positioning function and the precise guiding ruler with clear scale can facilitate high-precision cutting. Good Stability: The large and thickened base and screw-reinforced handle ensure good stability so you can use this product safely. How to Use Fixed Position: Hold the handle with one hand pull the slide back to the seat and place the ceramic tile flat on the base plate (if necessary extend the ruler to measure). Align the cutting line of the ceramic tile with the center support plate and the front end of the ceramic tile should be close to the notch of the base plate. Score and Press Down: Lower the handle and make the cutting wheel contact with the surface of the ceramic tile. Push the handle forward lightly to cut a continuous even straight line on the ceramic tile. Break-off: Lift the handle slightly backward allowing the pressure block to fall smoothly onto the front end of the ceramic tile. Apply appropriate force to push the handle down and the ceramic tile will break along the scoring line. Specification: Product Model: 800F Cutting Wheel Model: YG96 Color: Blue Cutting Wheel Material: Tungsten Alloy Handle&Bearing Material: Aluminium Alloy Base Material: Aluminium Alloy Sponge Slide Rail Material: Alloy Steel Slide Rail Surface Treatment: Hardening Process Electroplating Process Operating Method: Manual Guide Rail: Dual Track Special Function: Infrared Positioning Balancing Brackets&Ruler Bar Adjustable Angle Range: 0-90° Battery Type: 2* AAA (Included) Slide Rail Diameter: 20mm/0.78in Base Plate Thickness: 1.2mm/0.04in Maximum Cutting Width: 60cm/23.6in Minimum Cutting Width: 1cm/0.39inch Maximum Cutting Thickness: 15mm (3/5inch) Gross Weight: 8kg/17lbs Package Size: 82*25*18cm/32*9*7inch Base Size (L*W): 81*20cm/31*7.87inch Package Included: 1* Manual Tile Cutter (With Balancing Brackets+Ruler Bar) 1* English Manual