5X PLC Programmable Logic Controller DC 10-28V PLC Regulator FX1N-14MT Industrial Control Board

Function: 1. Turn on the power relay 1 is closed after seconds of closure; then relay 2 is closed after seconds of closure. 2. Turn on the power relay 1 is turned off after seconds of closing; then relay 2 is off after seconds and then cycles. 3. When the power is turned on relays 1 and 2 are not activated. When there is a signal or the button is triggering relay 1 is turned off after seconds is closed; then relay 2 turns off after seconds and then turns off until the trigger repeating the same action. By programming signals 1 2 any control of relays 1 and 2 can be performed. 4. When signal 1 has a signal relay 1 is closed and relay 2 is off; 5. When signal 2 has a signal relay 1 is off and relay 2 is closed. 6. Only the NPN signal sensor can be connected and the sensor signal can be programmed to carry out any relay monitoring. 7. When signal 1 has a trigger control relay 1; When signal 2 has a trigger control relay 2. 8. Turn on the power control the engine to turn for seconds then turn seconds and . 9. When signal 1 has a signal the motor is controlled to turn forward; When signal 2 has a signal the motor turns. Condition Model: FX1N-14MT Power Supply: 10-28VDC Maximum memory: 8000 steps Colour: Black Material: Plastic Package Contents: 5 x Industrial Control Board 5 x housing Only the above package content other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.