5V 12V 24V Voltage Detecting Module Relay Switch Circuit Measurement Charging Discharge Monitoring Overvoltage Protectio

Description 1 Under non settings press the SET key and the cycle display working mode lower limit voltage upper limit voltage 2 Under the non settings state the Changan SET key is 2 seconds to enter the parameter settings state the display display F01 press key to select the parameters to be set F01 upper limit voltage F02 lower limit voltage F03 working mode F03 working mode F03 working mode F03 working mode F03 working mode F03 working mode and F03 working mode F03 working mode F03 working mode and F03 working mode F03 working mode and F03 working mode F03 working mode and F03 working mode F03 working mode and F03 working mode F03 working mode and F03 working mode and F03 working mode F03 working mode and F03 working mode F03 working mode F04 voltage school accuracy 3 After selecting the parameters that need to be set press the SET key to enter the parameter setting state and adjust the key When the current limit voltage is greater than or equal to the upper limit voltage the display displays the ERR for 1 second prompting the user When the current limit voltage is equal to the upper limit voltage the relay output function is turned off 4 After setting the parameter value press the SET key to return the parameter list 5 After the parameters are set press the SET for 2 seconds to quit and save the parameters 6 In the non setting state press the SET and key for 2 seconds at the same time to restore the factory settings 7