5M SMD 5050 RGB Waterproof Music Sound Sensor 300 LEDs Strip Light DC12V 20 Key IR Controller

Specifications: Strip Light: Color: RGB 5050 View Angle:120 Working Voltage: 12V DC LED Quantity: 300 leds/5 Meter Working Current/Meter: 1.2A Output Power: 72W /5 Meter Working Temperature:-25C to 60C IP Rating: Waterproof IP 65 Luminous Flux: 700-800 Lumens/Meter Size: L500cm (5M) x W1.0cm x T0.22cm IR Controller: Working Temperature:-20to +60 Supply Voltage :DC12V Output:three output Max Load Current:3A each color Features: -Waterproof flexible strip -Maintenance-free, easy to install -Low heat, high brightness, in harsh conditions work very well. -Long life 50,000 hours. -Super bright 5050 SMD LED, high intensity and reliability -Low voltage, long life, environmental protection. -60 SMD LEDs per meter, total 300 LED for 5 meters -Back with double-sided adhesive tape. -Available in full range of single-color: red, yellow, blue, green, white etc. There are 4 different music control function that change the color and flash to the beat of music. You can also adjust the brightness, static colors and color changing effects via infrared remote control (not music mode). When it is in sound-control mode, the colors will change with the music rhythm (>72db) Light will JUMP/FADE to follow different music rhythm: general/tenderness/active/DJ music. This sound sensor IR LED controller for RGB rope light can select different colors and pre-programmed patterns; JUMP and FADE. It can adjust the brightness and speed of colors, and the color of the light will JUMP/FADE according to the beat of music. Sound-Control Mode 1: (General Music) = all colors will gradual/jump change following the music/sound rhythm. If no music/sound output is sensed, all colors will gradual change. Sound-Control Mode 2: (Tenderness Music) = all colors will slow breathing or jump change following the music/sound rhythm. If no music/sound output is sensed, all colors will slow breathing change. Sound-Control Mode 3: (Active Music) = all colors will jump change followingthe music/sound rhythm. If no music/sound output is sensed, current colors keep lighting. Sound-Control Mode 4: (DJ Music) = all colors will change following the music/sound rhythm. If no music/sound output is sensed, all colors will off. Application: *Widely used for home decoration use, hotels, clubs, shopping malls *Architectural decorative lighting, boutique atmosphere lighting *Extensively applied in Backlighting, concealed lighting, channel letter lighting *Emergency & security lighting, advertisement sign lighting *Decorative lights for holiday, event, show exhibition,etc. Note: Installation surface must be smooth,clean and dry. The part of LED components can not be fixed on the surface of the sharp edge. Strip should not be collided or crushed. Strip can be cut following the cutting lines. Package Included: 1 X 5M 300 LED RGB Strip 1 X 20 key IR Controller (Adapter is not included)