5000W 220V Electric Welding Machine IGBT DC Inverter ARC MMA Full Copper Core Welding Tools

Specification: Material: metal + plastic Color: red Input voltage: 220V Rated frequency: 50/60Hz Rated input capacity: 6KVA Duty cycle: 60% Output current: 20-200A Power: 5000W No-load Voltage: 54 V Rated Output Voltage: 30V Thrust Adjustment Range: 20-120A Rated load sustainability: 60% No-load Consumption: 40W Efficiency: 85% Power factor: 0.93 Shell protection grade: IP21S Insulation grade: F Applied Welding Rod: 2-10mm Electrode Diameter: 4.0 mm Size:approx: 31x13x21cm Features: Wide range of use Durable, long service life Energy efficient, fast cooling Intelligent identification of voltage, safety Looks beautiful, waterproof How to use? Operation method 1. Installation is correct, turn on the power switch, the light is on, the fan starts to rotate (Note: The wide voltage welder delay start to protect the welder from the grid voltage fluctuations is too large, resulting in damage to the welder and set Delay start, the welder 45s after power can be used normally) 2. Welding process requirements according to the workpiece may be, if the choice of improper arc will appear unstable, splashing and sticky phenomenon, in this case, you can change the fast plug to change the polarity 3. If the workpiece and the welding machine relatively far away from the secondary line (welding wire and ground) is relatively long, so select the wire cross-sectional area should be cooperative larger to reduce the cable voltage. Application: iron columns, fences, iron doors and so on Package include: 1 x welding machine 1 x hex wrench 2 x fast plugs Note:The product does not have a plug, and the buyer needs to connect the power plug according to the requirements.