40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench

Description 40 50 100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W Wrench Specification Material High Quality PP Stainless SteelColor Black OrangeApplicable Brick Difference 1 5mmApplicable Tile Thickness 5 16mm Features 1 Wear resistant recyclable reusable 2 Easy to use in DIY operation 3 Balance tiles in the same horizontal position 4 Improve tile installation speed 5 Reduce installer fatigue pressure 6 There is virtually no crackless flat surface 7 This reduces the need for sharpening and polishing 8 Avoid shingles from movement during solidification Usage Tips Lay the first tile leaving more than 2mm Close to tile Insert T pins next to the gap between the tiles Then rotate 90 degrees and the T needle is attached to the bottom of the two tiles Adjust the cover by hand wrench until the two tiles are on the same level After leveling for about 5 6 hours before the cement adhesive is completely dry rotate the lid in reverse and take off the 180 degree T needle Avoid not removing the T leveling tile system 1 Ceramic tile joints are 2mm or more cross joints are recommended 2 When leveling adhesive cement or tile cement around T type leveler should be cleaned 3 Remove the T type straightener about 5 6 hours after leveling before the tile or cement binder is completely dried Package Included 40 50 100 x Tile Leveling System Floor Kit Optional 1 2 x Wrench More Details