3pcs 60V 16S 45A Li-ion Lithium Battery Protection Board BMS PCB System

Note: The protective plate cannot be used in parallel. Specifications: Continuous discharging current: 45A Instantaneous diacharge current: 100A Charging voltage: 67.2V Charging current: 45A Over-charge detect: 4.280.05V Protect delay: 100ms Over-charge release: 4.080.05V Balance: Detect voltage: 4.20.025V Release voltage: 4.20.05V Balance current: 605mA Over-discharge: 2.550.08V Over-discharge detect delay: 50mS Release voltage: 2.90.1V Detect voltage: 150mV Detect delay: 15mS Current detect: 13010A Resistance: 15m Working current: 60uA Sleep current (when over-discharge): 10uA Working temperature: -30~80 Size: 120 x 60 x 9mm Main function: Over charge protection, over discharge protection function, short circuit protection function, over current protection function,with band balance. Connections: Step1: Connect charging /discharging wire battery pack negative wire Step2: After confirm the wires are connected OK, plug the connector cable in the BMS DO NOT plug CONNECTOR CABLE in the BMS before connect wire.. Attention, ESD protection during work Package includes: 3 x 60V 16S 45A Protection board 3 x Cabel wire