3S 12V 100A Lithium Battery Protection Board PCB BMS Charge Protect Module

Feature: *The battery protection board cannot be used for iron phosphate carp batteries sick gas lamps electric drill battery packs electric bicycle battery packs children s car batteries motors or live motor products please pay attention to customers who purchase the above combinations! *The described power range is applicable to the following products: massager battery pack LED light backup power supply 12V electronic products solar street light battery pack monitoring backup power supply and other products. *T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection the solder joint should be removed next to the 0R resistance. *Note: 3A current discharge products above the battery discharge rate to 3C or more. *Magnification calculation formula: 1C magnification of the battery 2000 capacity is equal to 2AH * 1 = 2A operating current. 3C magnification battery 2000 capacity equal to 2AH * 3 = 6A operating current. Specifications: Model: HX-3S-F100A Overcharge voltage range: 4.28v ± 0.05v Size: 70 * 60 * 8.5mm Over discharge voltage range: 2.5 ± 0.05v Upper working current: 100A (pay attention to heat) Operating temperature: -40 --- +50 ° Upper limit instantaneous current: 100-120A Storage conditions: -40-- +80 ° Quiescent current: less than 30uA Effective life: more than 30 000 hours Internal resistance: less than 300mΩ Short circuit protection: protection delay self-recovery. Equalizing current: 65 mA Charging voltage: 12.6V-13V Charging current upper limit: 10A Suitable for: massager battery pack LED light backup power supply 12V electronic products solar street light battery pack monitoring backup power supply and other products. Quantity: 1pc Package Included: 1 × Lithium Battery Protection Board Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data.single head double head.