36 Pairs 3/16 T316 Stainless Steel Cable Railing Hardware Kit For Wood Posts L+R

Description This package contains 36 pairs of 3/16 inch swage lag screws for attaching steel cable. The threaded connection is very strong and reliable.These screws are made of high-quality 316 stainless steel which is anti-corrosion and anti-rust so that they can be used for a long time. Application These screws are suitable for 3/16 steel cable. They can be used either indoors or outdoors and can be used to attach wooden posts. Specification Colour: Silver Material: 316 Stainless Steel Number of Pieces: 36 Pairs Applicable Thread Size: 3/18 Package Size: 10*8*6cm/3.9*3.1*2.4inch Gross Weight: 1.56kg/3.4lbs Net Weight: 1.1kg/2.4lbs How to Use Step1: Cut the appropriate length of steel cable. Measure the distance of the wood post edge The length of the cable should be 1-1/2 inches shorter than the distance between the two posts. Step2: Crimping. Insert the 3/16 steel cable into the tube of the lag screw. Use a Cable Crimper to make crimping. One crimping is enough. One end with a left-hand thread and the other end with a right-hand thread. Step3: Tension the Cable. Screw the lag screws into the holes in the post which have been pre-drilled and then adjust and tighten the cable. Package Included 36 Pairs* Swage Lag Screws 1* Spanner 2* Drill Bits Note Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement and make sure you do not mind before ordering.