315MHz DC12V 10A 1CH Single Channel Wireless Relay RF Remote Control Switch Receiver Module

Specification:1. Input Voltage: DC10-14V2. Standby Current: 5MA3. RF Frequency: 315MHZ4. RF Working mode:Super heterodyne receiver5. Receiver Sensitivity: 90dBm6. Remote Control Distance: 100 meter(In open environment)7. Decoding Way: MCU Software decoding8. Can store the number of remote control:509. Support remote control type: Fixed code, learning code10. Channel: 1CH11. Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)12. Wiring Method:Fixed wiring terminal13. Working Voltage: DC12V14. Output Current: 10A15. Rated load:10A 250VAC / 10A 125VAC / 10A 30VDC / 10A 28VDC16. Output:Normally open,Common,Normally closed17. Dimension:3.5cm*3cm*1.6cmHow to use:- Working/output way:1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.4.Delay: Press remote control s one button,relay is working,release the remote control and begin timekeeping,after 5s/10s/15s will automatically close the relay- Learn:1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control (press 1 times to learn Momentary;2ti