30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone

Description The Holybro FETtec FC G4 features the latest STM32 G4 MCU with math accelerator for the ultimate in flight performance onboard OSD for KISS flight tuning 2 dedicated BECs for 5V and 16V switchable power DSHOT2400 outputs for support of up to 8 motors and dual 20 20 and 30 30 mounting holes Note Currently the Holybro Fettec FC G4 does not support BLHeli 32 ESC Configuration via FC Passthrough and BLHeli 32 ESC telemetry current reading An Betaflight Flight Controller is needed to configure BLHeli32 ESC Setting SpecificationLatest STM32G4 Processor170Mhz Math acceleratorMPU6000Supply voltage 6 27V 2S 6S Lipo 2x dedicated onboard BEC max 600mA each 5V BEC for RX5V 16V BEC for VTX switchable and real Pit 2x 8 pin connector for solder free ESC connectionConnector 1 ESC signal 1 4 telemetry VCC GNDConnector 2 ESC signal 5 8 depending on UAV type 1 4 telemetry VCC GND1x 8 pin connector for solder free VTX cam connection and OSD or digital systemsreal Pit VCC GND Video in Video out BEC 5V 16V VCS TX3 RX32x 6 pin connectors for serialsRX1 TX1 3 3V VCC 5V GNDRX3 VCS TX3 RGB LED VCC 5V GND1x 4 pin connector for receiverSignal TLM 5V GND5 UART serialsUART 1 freeUART 2 used for ReceiverUART 3 freeUART 4 used for onboard OSD can be set freeUART 5 used for ESCs TLM Onewire4 ESC solder pads Signal GND in each cornerBuzzer pads4 tiny RGB LEDs selectable co