3-in-1 Soil Tester Moisture PH Meter Sunlight Intensity Measurement Monitor, 501 Original

3-in-1 Soil Tester Moisture PH Meter Sunlight Intensity Measurement Monitor for Gardening Plants FarmingSpecification:Material: PlasticProbe Length: 17cm/6.69\" (Can not be placed directly in the water to measure the water will damage the electrode!)Function: Humidity Detection, PH Detection, Sunlight DetectionFeature: Good helper for gardening, no need battery, plug and play, multifunctionalProduct Weight: 105gProduct Size: 260 X 62 X 40mm/10.24 X 2.44 X 1.57\"Instruction:First insert the probe into the soil as deep as possible.The probe is inserted into the soil at a position greater than 10cm of the probe.1: Turn the key on the pen to MOIST, MOIST means moisture key, the corresponding table is MOIST, DRY is dry, WET is wet.Values 1-3 (red part) indicate that watering is required.Values 4-7 (green part) are appropriate, please adjust the watering time according to the variety of plants.Values 8-10 (blue part) indicates that it is too wet.2: Turn the key on the pen to LIGHT, LIGHT means light intensity, the measuring range is 0~2000, the larger the value, the stronger the light, please decide whether shading according to the plant species.3: Turn the key on the pen to PH, PH means PH, the corresponding table is 8~3.5 value, ALKALINE is alkali, ACDIC is acid, the value is 7 is basically neutral. The smaller the value, the greater the acidity, Please adjust the pH of the soil based on the variety of plants.4. Be careful not to touch the stone when inserting the electrode during use, and do not use excessive force, otherwise the electrode may be easily damaged. Please wash the electrode after use.Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3mm measuring deviation due to manual measurement.1 X Soil Monitor