2500W 10A Boiler Water Heater Immersion Heater Element for Bathtub Swimming Pool

Technical Specifications: Power Source: Electric Power plug:.AU Plug Voltage:220-250V 50/60Hz Power: 2500W Current: 10A Material: 316L Stainless steel + Plastic Size: 6.5*17.8cm/2.5*7" Cable length: 145cm/57" Features and Benefits: Sealed design, suspended heat fast --- water and electricity separation, more secure Suspended water heater - life increased by 3 times, more durable 2 square copper power cord hot fast - thick copper core, long time without heat Anti-leakage, water separation design Suspension heating design Suspended in the water More secure and more durable The heat pipe will not contact with the container Three core copper wire Pure copper wire Outer diameter 8MM sheathed wire Long time power will not heat It is forbidden to use water during heating Instructions: 1. First, plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and other containers filled with water. Into the water heater, water level to ensure that the water heater suspended in the water. Water level in more than 25 to 30 cm into the heater. The product will automatically float on the surface, by adjusting the power cord, you can let the heater suspended in the right place. 2. If the container water level is not enough 25 cm, the product can not be suspended in the water, please ensure that the heating pipe must be submerged in the water, the heater can be slightly tilted a little use. If it is inflatable swimming pool or bathtub and other material containers. For safety reasons, you can put a ceramic under the heat pipe to avoid direct contact with the heat pipe. 3. The container is filled with water, put in the heater plug the power head waiting for the heater indicator light, the heat pipe around the distribution of many small bubbles, and began to heat. If the water is large, heated to half of the need to unplug the plug, try the next water temperature. 4. When the water temperature reaches the required temperature, first unplug the plug, wait 20 seconds to take out the heater. You can use water. Whether the water can be heated in the water temperature: Suspension heater design is not leakage, the factory is also after 3000 volts high pressure detection. So please be assured, but we can not guarantee that the product to the hands of different users, in the use of different methods for a period of time after the occurrence of other changes. So from the safety point of view. Please also be sure to unplug the plug and then contact with water is the most secure. Heating time: Calculate the formula - water 100L heating to water temperature 40 takes 1 hour, according to the length * width * high * calculate the volume of water, calculate the approximate heating time. Precautions: 1. product heating, the human body can not contact with water. To unplug the plug and use water again. 2. Stainless steel ball part, must be all inside the water to heat, or will be damaged. 3. Product power, need to match the use of mobile plug, be sure to pay attention to good quality. Product Maintenance: After the initial use, the inside of the wall will be similar to the rust spots. Because the stainless steel tube in the process of making heat pipe, from the straight tube bent into a spiral. Stainless steel surfaces are subject to friction and damage to the protective film. You can use our prepared sandpaper polished to maintain the surface of the product. After use several times, the stainless steel pipe wall will appear white scale, you can use the ball ball cleaning. Product wire / plug heat problem Our production materials use pure copper 2 square super thick wire, in the course of use, the power cord will only have the current through the normal heat dissipation. Please do not worry. If you find the product plugs are hot and hot, please stop using it immediately. This is because the plug of the power cord is plugged in and the outlet of the socket is not in good contact. In this case, we recommend replacing the socket to use or insert it in to the wall outlet. More details: