220V Body Sensor Microwave Sensor Switch For Moving Objects

1. Operating voltage: 220V-240VAC2. Power load: 1200W3. Power frequency: 50/60HZ4. Time delay: 10 seconds~30 minutes5. Frequency system: 5.8Hz+/-75MHz CW radar6. Transmission power: 0.2mW7. Detection angle: 360 degrees8 Installation method: indoor, ceiling mounting9. Light source control: 10-2000LUX10. Detection distance: 2-10m11. Size: 95x95x42mm12. Is a motion detector with adjustable sensitivity and light detection time setting13. Based on the Doppler principle and radar technology with antenna and high performance microchip14. Can penetrate objects, so concealed installation is an option15. Not affected by temperature, such as infrared induction will be at a temperature of about 37 degrees will be time-sensitive, such as summer, indoor, outdoor, or other operating environment may be higher than this temperature16. Infrared induction, need to pass through the lens, induction range angle is small, the blind area is large, radar induction almost no blind area17. Infrared induction will be affected by air dust, dust will affect the induction distance18. Load power: 600W (resistive load, incandescent lamps and other resistive appliances) / 300W 19. Interface: 3 pole pluggable port (N, L, L'), 1.5mm2 cable20. Do not reverse the zero and fire wires, otherwise some equipment may not work