220V 50HZ Binding Machine Desktop Manual Hot Melt Glue Book Binder Hot Glue Book Binding Machine

Specification: Material: Plastic Color: White Voltage: 220v, 50Hz Current: 0.12A Leakage current: 5 mA Punch diameter: 5.2mm Punch margin: within 25mm Power: Constant temperature 25w Minimum binding thickness: 10mm Maximum binding thickness: 30mm Binding materials: Professional cutter head diameter: 5.2mm Professional riveting pipe diameter: 4.8mm Size: (L)X(W)X(H) 287X187X372mm /11.3''X7.36''X14.65"(appr.) Plug: China National Standard Plug(We will be based on your country to send the corresponding adapter plug) Features: High efficiency binding Replaceable and sharp drill bit Suitable for financial documents Solid construction and durable to use Humanized pressing centering spindle Manual operation by pluging the power Equipped with magnetic cardboard box for easy cleaning Usage: 1. Insert a plastic riveting tube into the riveting tube inlet, place the bound documents or materials that need to be punched under the drill, adjust the punching position, and then press the punching handle with your hand to press down until the cutter edge contacts the cutter mat 2. Pick up a piece of plastic riveted tube from the tube receiver box, insert it into the punched hole, then move the left side of the riveting part, lift the centering pin by hand, and pass it through the riveting hole until it is pressed down to the center hole of riveting head 3. Hold the rivet handle by hand and press down (about 3 seconds) then lift the rivet handle and take out the file. 4. It is recommended to empty the scrap box immediately after using the machine for the next time. If the paper scraps are not emptied for a long time, the machine may malfunction. Package included: 1 Set Binder Machine