220V 300W H160 /75L Portable Oxygen Hydro gen Flame Generator Acrylic Polishing Machine

Feature: Take water (Distilled water and pure water) as fuel; "low working voltage, cut off automatically beyond the set voltage" design; Improved model from APM-H60; Its electrolysis adopts series and parallel compound technique. Description: Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. This machine has two colors, blue and white.Color will be shipped at random. Use for: Heat treatment for metal parts. Weld the hinge of spectacles rim. Seal the injection glass bottle, conforming to GMP industrial standards. Fuse the lead or tin alloy plate for storage battery. Cut and fuse quartz or fine parts etc. Peel off FPC of computer, fuse LED chip and thermocouple. Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny. Specifications: Model: APM-H160-AU Shell Material: Metal Color: Blue Input Voltage: AC220V Maximum Output Gas: 75L / H Power: 300W Operation Gas Pressure: 0.08-0.13Mpa Environment Temperature: -10~40 Flame Temperature: 2800C Water Consumption (L / H): 0.015 L / H Flame Gun No.: Single Elecrtolyzer Capacity: 1.6L Size: 320x220x310mm Package included: 1 x Hydrogen Flame Generator 1 x Hose 1 x Sprayer Nozzle Feature: Strong and durable, light weight and portable. Save a lot of money and time for you. Economical and practical. Energy saving, environmental friendly, safe and reliable The edge polished by this machine is more smooth and shiny. More details: How to add water? 1. Turn off the torch. 2. Switch off the power and open the valve on the torch to let out the remaining gas. 3. Screw off the top cover. 4. Add water close to the "high" line. 5. Screw on the cover and switch on the machine, and it can work again. Tips: The temperature is up to 2800 when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. Do not repair it by yourself, you should contact us. The above cover; please do not load metal pieces. Please connect the ground wire. Forbid ignite while no air pressure