2.4inch 60mm LED Turbo Boost Vacuum Press Pressure Gauge Meter 35 Light Colors

Specifications: Color: Black Material: Plastic cover + aluminum + Iron Pressure: 300KPa Diameter: 60mm Power-supply voltage : 10V to 16V DC (12V vehicles only ) Current consumption : the maximum value obtained when connecting one gauge +B wire : 200mA (IGN ON ) ILM wire : 0.5mA Temperature range : Temperature range for storage Temperature range for operation Gauge Boost sensor Pressure sensor Te mperature sensor Exhaust temperature sensor -30(-22) ~+ 80(176) -30(-22) ~+100(212) -30(-22) ~+140(284) -30(-22) ~+150(302) -30(-22) ~+130(266) -30(-22) ~+60(140) -30(-22) ~+ 80(176) -30(-22) ~+120(248)unit C (F) -30(-22) ~+150(302) -30(-22) ~+130(266) The sensing part of exhaust temp . sensor is not included in the temperature range above . How to attach Mounting bracket set 1) Open the package and take out the double-sided tape as Figure 2 to attach the bottom of the bracket(as Figure 1). 2) Insert the protruding part of the bracket into the meter cup, using the bolts, nuts and washers to fix the bracket(as Figure 3) 3. Attach 1~2 pieces of double-sided tape to the aluminum case as buffer (as Figure 4). 4) Pass the meter wires through the hole of the meter cup and connect them to the gauge. 5) Place the gauge in the meter cup making sure that wires are not sandwiched . 6) Attach double sided tape on the back of the mounting bracket as shown in figure 5 . Bend the mounting bracket to conform to the structure of the location where you intend to attach it. Note: 1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Included: 1 x Turbo charging meter with pressure sensor kit