2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPI

More document click to download 2 4G NRF24L01Features This module uses the domestic RF bonding chip BK2425 which integrates all the high speed signal processing parts related to the RF protocol Since the link layer is fully integrated on the module it is very easy to develop Automatic detection and automatic retransmission of lost data packets retransmission time and number of retransmissions can be controlled by software automatically storing data packets that have not received the response signal after receiving valid data the module automatically sends a response signal without additional programming Carrier detection fixed frequency detection built in hardware CRC error detection and point to multipoint communication address control packet transmission error counter and carrier detection function can be used for frequency hopping setting six channel receiving channel addresses can be set at the same time and the receiving channel can be selectively opened The SPI interface of the BK2425 can be connected by the hardware SPI port of the MCU or simulated by the I O port of the MCU The internal FIFO can interface with various high and low speed microprocessors which is convenient for using low cost MCU Specifications Onboard 2 4G PCB antenna ISM band SMD 8 stamp port package compact size easy to use for embedded applications Supports six channels of data reception one pair of six Support GFSK modulation Supports 2Mbps 1Mbps 250Kbps data rate