(2 Spools) PGN Flux Core MIG Wire - E71T-GS - 0.035 Inch 2 Pound Spool - Gasless Mild Steel MIG Welding Wire with Low Splatter - For All Position Arc Welding and Outdoor Use

Weld Your Way to Impressive Results Your choice of MIG wire can make all the difference. It can mean the difference between unsightly splatter and a smooth weld. The difference between exceptional precision and an uncontrollable arc that ruins all your hard work. Choose professional-looking results with PGN. Our E71T-GS flux core MIG wire stands out with impressive arc control and low splatter when working on mild steel. So you end up with a beautiful weld you’ll be proud to show off. By going for a flux core MIG welding wire you’ll have the power to ditch that shielding gas cylinder and work outdoors with the wind in your hair. Just turn on your machine start welding and watch the flux filling work its magic. Product Specifications: Weight: 4 Pounds Wire Diameter: .035” Inches Spool Diameter: 4” Inches Spool Center Hole Diameter: 0.75” Inches Spool Thickness: 1.75” Inches Tensile Strength (RM MPa): 510 Deposited chemical composition: (wt%) C: 0.039 / Mn: 0.72 / Si: 0.35 / S: 0.006 / P: 0.007 Cr: 0.016 / Ni: 0.013 / Mo: 0.0001 / V: 0.0001 / Cu: 0.032 Package Inclusions: 2 x 2lb MIG Wire Spool Experience the Versatility Whether you’re tackling a client’s project performing repairs in the garage or bringing striking metal art to life the E71T-GS flux core welding wire .035 allows you to create a variety of welds when working in all manner of positions. It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints butt welds and lap welds. And with a wire thickness of 0.035” you’ll achieve great penetration without the high risk of burning through the base metal. With PGN you also don’t just get a gasless MIG welder wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead get MIG welding accessories you can count on.