18W RGB LED Swimming Pool Light Underwater Waterproof Remote Control Wall Mounted Night Light

Specification:Power: 18WLED Chips Type: SMD2835Beam Angle: 120 degPower rating: AC12VFrequency: 50~60HzWaterproof: IP68Installation Location: 0.6M below water levelCable Length: 135cmRemote Control: Within the scope of 50m Features:252Pcs 2835 lamp beads LEDs with super bright and crisp colors.Can be switched on and adjusted by a remote RGB controller for convenience.Plastic housing makes it acid-proof and alkali-proof.Supports 15 different kinds of color styles.The lamp is filled with resin inside, which makes it 100% waterproofEasy to install, fitting to standard pool fittings.Compatible for both fresh or salt water pool Remote Control Operation:? ON/OFF: Power switch function,press the key for turning on or turning off the light.? MODE: Modes selection,the light can be turned to the first program when press this key for 5 seconds at any working program.? 15 pre-programmed color modes of RGB light.1.R-G-B change gradually to full modes2.RG:Static State Yellow3:RB:Static State Purple4.GB:Static Cyan-Blue5.RGB-RG-G-GB-B-R animation 6.RB-GB-B animation7.R-G animation8.B-R animation9.G-B animation10.RB-B animation11.G-GB animation12.R:Static State Red13.B:Static State Blue14.G:Static State Green15.RGB:Static State White? B+/B-: Adjust the brightness of the light at any working program,there are total 10 adjusting levels.? S+/S-: Adjust the color changing speed,there are total 10 adjusting levels Note:You will need a AC12V transformer to power the lights. If more than AC12V, it will damage the light. Package Included:1 x LED Light1 x Remote Control (1x Battery 23A/12V Not Inculude )1 x Waterproof Connector