15/50/80mL All Transparent Soft Glue Slow Drying Needle Type Clear Strong Adhesive Phone Frame Screen Repair Maintenance

Description: This adhesive is an all transparent, slow drying and soft type glue, and needs 24h for full curing (please don't move the bonding objects before full furing). It's soft, clear and will not whitened or hardened after curing, won't affect the appearance of the bonding objects. Stored in aluminum plastic bottle and applied with a needle tip, you can easily squeeze an appropriate amount of glue without waste. Then cover with the pinhead cap and store in a cool, well ventilated area for using again. It's perfect for phone frame bonding, screen replacement, phone maintenance, DIY phone case. Specification: Adhesive Type: Arcylic Adhesive Bottle Material: Aluminum Plastic Glue Color: Transparent Odor: Slight Odor Hardness: Soft Type Glue Viscosity: High Viscosity Full Curing Time: 24h Net Content: 15mL, 50mL, 80mL for Option Advantages: - Environment friendly - Durable / Flexible - Non hardening - Waterproof - Low smell Features: 1. Slow drying, soft film, needs 24 hours for full curing 2. Needle tip, more precisely, not easily jammed 3. Low drawing effect, easy to apply, good thixotropy 4. All transparent, won't whiten or harden, won't affect the appearance 5. Aluminum plastic bottle, good toughness and not easy to deform 6. Detachable, blow it with hot wind for several minutes. Notice: 1. Due to the high concentration of glue, it is a normal phenomenon that air enters inevitably during filling. 2. Irritation to the skin and eyes, please use it in a well-ventilated environment. 3. In case of contacting with eyes, please rinse with plenty of water and seek for medical advice immediately. 4. Store in a cool, well ventilated area. Keep it away from children. Away from sources of ignition Usage: 1. Please read the product manual carefully. 2. Before using in a large area, please do a experiment in small area at first. 3. Make sure the sticky surface clean and dry. 4. After opening, coating it evenly on the sticky surface. A little pressure is needed to the sticky surface. 5. Let it sit for few hours. After 24 hours it can reach the optimum adhesive strength. (please don't move the bonding objects before full furing). 6. When you don't use it, please put on the cap to avoid the glue curing. Package Included: 1 x All Transparent Soft Glue (15mL/50mL/80mL for Option)