12V Wireless Winch Remote Control Twin Handset For Off-Road Car Truck ATV SUV

Description 1 Fit for all 12V solenoid operated winches2 Each remote control comes with its own code so there is no interference with other similar remote control Feature 1 Latest Remote System Kit WITH AUTO POWER OFF 2 Improved components Improved reliability Improved range Improved battery life 3 Wireless remote control kit 12V for winches up to 17 000lb Approximately 100ft range 4 Heat shielded cables with pre fitted heat shrink insulated terminals for easy fitting Specification Supply Power 12V DCProtection Function On Off SwitchRemote Control Distance 100ftBattery 23A 12V Not including Principle of operation 1 Once connected to a power supply the two output wires of the receiver will go to the supply voltage 12v or 24v depending on the model when the corresponding button on the transmitter hand set is pressed 2 The output can then be used to operate the trigger terminals on a secondary contactor solenoid to switch the main load e g a Winch 3 The outputs MUST NEVER be connected to earth as otherwise they will short circuit and burn out 4 If you have any doubt about which are the trigger terminals on your solenoid first check by using a thin piece of wire connected to the positive supply when you apply it to one of the solenoid trigger terminals the winch should run in one direction if you apply it to the trigger terminal it should operate in the opposite direction 5 In most cases winches are fitted with a plug in wander lead at the back of the wand