12V-99V LED Digital Display Throttle Grip Handlebar For E-bike Electric Scooter

Description:Battery is based on the V number of units of measurement, the turn to regardlessof lithium batteries, lead-acid batteries, water batteries, dry batteries,for various types of electric vehicles, can automatically identify the voltage.Good waterproof performance, high-quality rubber, durable.Specification:Name: Electric cars gripColor: BlackMaterials: RubberVoltage: 12V-99VDiameter: 23mmInstruction:1.Then connect the black line negative, then connect the red line is 5V and green signal line,switch to the normal start, and then install the other lines, remember, turn the black line is negative,not with the controller other line connection, turn the red line is positive 5V, can not be connectedwith other red lines, replace, can not take the wrong line, once connected to the wrong causethe controller or switch to damage.2.Turn the red wire connected to the controller to turn the line is 5V red line (or other colors),the green signal line then the controller turn the green signal line (or other colors),the yellow voltage display Line access to electric vehicle power positive (front headlights, instrument panel) can be.Note:Due to the manual measurement,there might be some error.According to their own minimum and maximum voltage values,usually used in the lowest 30%, charging up to 80%, any lithium batteryis no memory, so you can at any time Charge, ready to use, not affected,not excessive charging and over-discharge, every 2 months fully chargedand fully used up twice,