110V 300W 200℃ Hot Air G un Heat Shrinkable Sheet Setting Tool Rubber Stamp DIY ToolThermal Blower US Plug

Features Can be used to heating relief powder and shrinkable sheet Keeping 3 5cm distance from work and about a 45 degree angle to heat until it is completed After completion use the heat g un at high temperature to blow a few seconds It not only can add its hardness but also its brightness The temperature can not adjustable in theory it can reach at 200 degree within a few seconds Do not work over 10 minutes blow at 45 degree angle to avoid heat suck Be careful when using the hot air g un Specification Color Black Black Pink White White Black White White Red Red White Blue Blue Black Blue Red Green GreenMaterial ABSType Constant temperatureWorking temperature It can reach at about 200C 390F within a few secondsRated power 300WPower type AC power supplyRated voltage 110VPower 50HzWorking time 8 minutesUsage 1 Plug in the heat tool 2 Hold the g un but do not touch the hot nozzle 3 Keep 5 6cm distance between the heat g un and your work about 45 for heating until the completion of the work 4 Turn off the power to stay cool Notes 1 This kind of g un can not adjust the temperature but it heats up quickly at about 200℃ theoretically Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion 2 This heat g un is not a High Power one due to its 300W low power But it is great for heating shrinkable film embossed powder rubber stamp the best choice to replace toaster or oven and the polymer clay will become hard and br