XINDA XD8613 Forged Aluminum Alloy 24KN Large Rescue Pulley Double Sheave Climbing Mountaineer Belay Rigging

Specification: Brand XINDA Model XD8613 Material Forged Aluminum Magnesium Weight 413g Size 8.2 x 15cm / 3.23 x 5.9inch Tension Statin: 24KN(2400KG) Rolling: 12KN(1200KG) Color Red Features: - Rating to 24kN for high durability to satisfy all your requirements, like pulling a standed boat,hauling some out of a crevass, etc. - Compatible with wide range of ropes up to 16mm (5/8"). Multiple anchors for complex rescue / hauling system setup. - Half round holes to evenly bear load pressure. Concave pulley with polished surface to enhance smoothness. - Division board in the middle to avoid strings winding together. Safer. Note: - Check the pulley if resist any crack, deform, corrosion. Check if the pulley able to work smoothly. - Check if the side board exist deformation. Check if the pulley rub with side board. - Before using the system with forward stop, check if the rope is properly installed and test the forward stop system (check if the rope is stuck in the correct direction). - When using a directional pulley at that time, depending on the angle caused by the rope, carefully add to the gravity of the pulley (and its determined point). - An accident can result in the disposal of the product after a single use, depending on the type and density of use and the environment in which it is used (severe environment, sharp edges, extreme weather, chemical products, etc.). - In addition to checking before or during use, it is necessary to conduct in-depth inspections by senior inspectors on a regular basis. The frequency of in-depth inspections depends on the type of regulations and the type and intensity of use. - Store the product in a dry and away from UV light, chemicals, extreme temperatures, etc. If necessary, clean and dry the product. Package Included: 1 x XINDA Pulley