SPC 95GF 95mm RC FPV Racing Drone BNF With Omnibus F3 4in1 BLheli_s 5.8G 48CH 600TVL

SPC 95GF 95mm Brushless FPV Racing Drone BNF With Omnibus F3 4in1 BLheli_s 5.8G 48CH 600TVL Specification: Brand name: SPC Maker Product model: SPC 95GF Wheelbase: 95mm Size: 76mm*87mm*50mm Weight: 72g (without battery) Flight weight: 105g (include battery) Motor: SPC Maker S1104 7500KV brushless motor ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo) Propeller: 50mm 4-blades propeller Receiver: Frsky/DSMX/Flysky/Futaba(optional) Camera: RunCam Micro Swift 1/3 "600TVL FPV camera 2.1mm lens CCD camera VTX: 5.8g 25MW-200MW 48CH Video transmitter Flight controller: OSDOminibus F3 flight controller integrated with OSD module OSD: Betaflight OSD Firmware of flight controller: Betaflight_3.1.0_OMNIBUS Flight time: 4 minutes Rear LED Ready( LED_Strip function) Buzzer Ready Battery: 11.1V 350mAh 30C lipo battery Ominibus F3 flight controller integrated with OSD module: -Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module (This is 6DOF version, no barometer and compass). -Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller than 130mm to exhibits its advantages in small dimensions and multiple functions. -It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting hole size is 20mm (2.5mm hole). -Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3) -STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed. -Constant current: 10A*4 (maximum current: 15A*4, 5s) -Supports 2-4S LiPo input. -Built-in 5V 1A BEC. -Supports popular receivers such as SBus, PPM, DSMX. -Buzzer, programmable LED, voltage monitoring, HLHeli ESC. 4 in 1 BLheli_s ESC: Input voltage: 2-4S LiPo and 2-4S HV LiPo BEC Output: Not available Constant current of a single ESC unit: 10A Maximum current: 15A 5 second. Dimensions: 27*27mm (main board) 31*31.5mm (including soldering pads and extruded part) Weight: 6.3g Firmware: BLHeli_s Supports D-Shot, Oneshot, rotation directions. Processor: SILABS EFM8BB21F16G MOS FET: TPN2R703NL Driver: new generation 3 in I MOS Camera parameters: Frequency band: 5362-5945MH Channel: 48 Modulation type: FM Select channel: switch Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs Transmit power: 131dBm Frequency control: PLL All harmonic: Max-50 dBm Frequency stability: 100KHz(Typ.) Frequency precision: 200KHz (Typ.) Channel disk failure: 1dB Antenna port: 50 Input format: NTSC/PAL SENSOR: PAL: 720540/NESC: 640480 1/4 " LENS ANGEL: H: 120 / V: 100 Baseband interface: P1, 27*2 Energy consumption: 200-215MA@5V DCIN Supply voltage: 2.9-5, 5V Operating temperature:-10~+ 60 Profile dimension: 14, 5 mm12, 2 mm+14, 5 mm12 mm Compatible: 1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E (with deviation firmware). 2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS (D16 mode) and XJT (D16 Mode) DJT DFT DHT Transmitter. 3.Flysky Receiver Support FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other second-generation AFHDS 2A protocol remote control 4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G, 7C-2.4G, T8FG, T10CG T12FG.T14SG. Receiver and VTX Manual, please click here. Package include: 1 x SPC Maker 95GF Frame 1 x Ominibus F3 flight controller integrated with OSD module 1 x Frsky/DSMX/Flysky/futaba(optional receiver) 4 x SPC Maker 1104 7500KV brushless motor 1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo) 4 x 50mm 4-blades propeller CW 4 x 50mm 4-blades propeller CCW 1 x RunCam Micro Swift 1/3 "600TVL FPV camera 2.3mm lens CCD camera 1 x 5.8G 25mW-200mW 48CH VTX 2 x 11.1V 350mAh 30C lipo battery (comes without charger) 1 x WS2812 LED Board 4 x 3*100mm nylon band 1 x 12mm*150mm magic band 2 x 15mm*50mm back to back with 3M rubber magic belt 1 x XT60 female plug to XT30 male plug converter