SCULPFUN S30 PRO Engraver 10W Engraving Machine with Automatic Air-assist System /Eye Protection Shield/ Replaceable Lens 410x400mm

Features: ▶ Upgraded Engraving with Air Assist System: The S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button this makes the engraving and cutting very and is very suitable for the manufacture of exquisite gifts. ▶ Excellent Engraving Performance: S30 PRO 10W is suitable for frequent cutting do everything faster; It can cut 10mm balsa wood and 6cm plywood at one time. And making it reach industrial-grade engraving accuracy with extremely solid and high- linear slide rail X- no e wavy pattern in carving small items. 410*400mm large-area engraving can meet your various engraving needs. ▶ Built-in high pressure air assist nozzle: S30 series is equipped with high-pressure air-assisted metal nozzle which can generate high-pressure airflow under the air pump greatly improving the cutting efficiency and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue making the cut surface very . ▶ Replaceable protective lens: Adopts innovative replaceable lens greatly improves the service life of the which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use the lens can be replaced to restore the cutting power. A free lens is included with the purchase more lens can be easily purchased from SCULPFUN. ▶ Eye Protection and Safety Design: equipped with a detachable eye which will not dazzle even without glasses. If you don t need it you can easily disassemble it. The presented A4 size steel pad can well the table from damage. Isolate fire hazards. There is a very and eye-catching power switch on the machine you can directly and quickly turn off the power in an emergency. ▶ Sturdy and Durable Frame: The S30 series is made of high-strength aluminum alloy its frame can bear up to 50KG weight without damage and is very durable. The frame can be used for a long time and maintain high only need to upgrade the latest when the machine needs to be upgraded. ▶ Innovative Expandable Design: you can purchase a Y- expansion kit to expand the engraving area to 935x400mm; purchase an - expansion kit to upgrade Up to 935x905mm engraving area to better handle large engraving or cutting work. And there are precise scale lines on the X- and Y- which is convenient for you to quickly measure the size of the engraved object. Specification: Model: SCULPFUN S30 PRO Power Input: AC 50/60HZ Output: 5A Engraving accuracy: 0.005mm Engraving area size: 410*400mm Machine power: about 84W Motherboard: 32-bit air-assisted motherboard reserve card offline printing function. (Upgrade Kit sold separately) Diode output power: 10W (note that this is light energy not electrical energy) focus: 0.06x0.08mm wavelength 455±5nm Focusing method: fixed focus column + sliding device protection cover: Equipped with a detachable protection cover to the eyes. You can adjust it up and down or remove the goggles. Air pump: Type: mainboard-controlled air pump voltage 30L/min Air hose inner diameter: 7.5mm Engraving material: all kinds of wood (including walnut cherry and other high-density wood) MDF zigzag cardboard leather PCB board aluminum oxide 304 stainless steel ceramic dark stone Cutting material: all kinds of wood (including walnut cherry and other high-density wood) MDF acrylic board cardboard non-woven bamboo leather some boards PCB boards Operating software: LightBurn (with air assist function M8) LaserGRBL LightBurn Benbox GrblContro