EleksMaker® EleksLaser A4 2500mW Laser Engraving Machine CNC Laser Engraver Printer

Description: EleksMaker New Arrivals. EleksMaker EleksLaser A4 2500mW Laser Engraving Machine CNC Laser Engraver Printer Exquisite Workmanship, Advanced Technique Smart Design, More Attractive Appearance Novel & Lightweight Construction of Excellent Stability 300mm*200mm (A4) Large Engraving Area 2500mW Powerful Violet Laser Module w/ Heatsink Perfect for Amateur DIY Lovers, Craft Making. Specification: General Specification Brand EleksMaker Model EleksLaser A4 Standard Frame Material Acrylic + Aluminum Max. Engraving Area 300 x 200mm / 11.81 x 7.87 inch Machine Size (L*W*H) 460x470x150mm / 18.11x18.50x5.91inch Certification CE, FCC, FDA (Please contact us if you need them) Technical Parameters Laser Power 2.5W/2500mW Laser Wavelength 445nm Control Board EleksMana SE Communication Port MircoUSB Stepper Motor 42H34S-1304A Power Input AC100-240V Working Voltage DC 12V Working Current DC 5A Supported Formats jpg, bmp, svg, G-code Engraving Accuracy 0.01mm Engraved Object Height No Limitation Support Systems Win XP / 7 / 8 / 10 Support Software EleksCam, Candle, T2 Laser, GRBL Controller, LiteFire, etc. Engrave Mode Photo, Word, Scan, Outline, Pixel Laser Engraving Can Engrave Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc. Can Not Engrave Metal, Stone, Ceramics, Glass, Reflective or Transparent Material Tips: - Further instruction about assemble steps, supporting software operation steps and board connection, please refer to the official Wiki: Click here - Laser self-checking tips link: Click here Note(Please pay attention): 1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. The red cord is DC12V (+) black cord is GND (-) yellow cord is signal (S). Please make sure you know the wire position and connect to the ManaSE board correctly. 3. The warranty period of laser module is one month. If you have any quality problem (Except individual situation like using the laser module more than 30 minutes per time and casue the damage ) please feel free to ask our customer service for a help. 4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. 5. If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according to your video and problem description. Thank you in advance. Package Included: 1 x EleksLaser A4 2500mW Engraving Machine Complete Set (Need to Be Assembled Yourself) FAQs: 1. How to assemble the kit? You can find the assemble steps in our official Wiki: Click here 2. What software can support this machine? Image format? Engrave mode? Supported Software: EleksCam,T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving 3. What system can the EleksCAM support? Support Win XP / 7 / 8 / 10; not support Mac currently. 4. My laser doesn't work, what should I do? If the machine does not work, it might because: The wire connection is wrong. Please check the connection like the picture shown. Your computer could not support the software. Please use Win XP 7/ 8 / 10 to check it. Software problem. Please check whether wires are inserted rightly. And then check your data setting. The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email. Laser module / driver board / power supply is broken. Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution. Laser module self-checking tips link is here: Click here 5: My software shows: Not data, what should I do? There might be two reasons: You did not open Administrator privileges to run the software. Please try this. Your computer architecture is incomplete: check whether VC ++ and. Net and directX are installed, and have to turn off the anti-virus software temporarily. 6. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software and firmware to do it. Or benbox software and benbox firmware. Please note that two firmware is not the same. Details are shown in the EleksCAM & Benbox software instruction above. 7. Can I upgrade stronger power laser module by myself? Yes, you can. DC 12V laser module can be installled on this machine. The red is positive. 8. When I click arrows to control the motors, it works. But when I begin to make it work with EleksCAM software, it doesn't move. What should I do? The EleksCAM can move but can't move when normal carving. The probelm is the region and language inside the system control panel. Please set the format to English and United States. Then it will be ok. Detail is shown in the wiki link above. 9. My laser module is always on and could not turn off. What should I do? Please try to connect the Signal(S) and GND(-). If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting. If the laser module is still on, that means the laser module might be damaged. You can check as the video shown: Click here 10. If my laser is broken and I might find the reason (Or I could not find) . What should I do? Find the reason: Take a video to prove the part is broken and then send it to us. We will give you a solution according to your video. Could not find the reason: Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer service with a video: cservice@banggood.com. The video should contain software setting, broken part details and the power-on machine. We will solve it asap.