DIY Tesla Coil Module Kit Ion Windmill Tesla Coil ZVS Technology Physical Electronics Production Parts

Manual Click here to openParameters Power supply input voltage 24V DC Power supply current 2A 3A Power supply interface positive and negative within 5 5 2 1 Audio interface 3 5 audio port Product size length 8 5CM x width 8 5CM x height 20CM Secondary coil size diameter 4CM height 10CM or so Number of coil turns 370 turns the enameled wire with a coil diameter of 0 2 we are winding when the coil is shipped The resulting volume is almost the same as a 0 25W speaker Audio interface 3 5 jack you can connect to the audio source of mobile phone mp3 computer The computer audio interface is 3 5 the audio cable used is 3 5 to 3 5 audio cable the mobile phone and MP3 interface are different please use the corresponding audio cable to 3 5 If you use other voltage or current that does not meet the requirements the power supply or positive and negative Extremely reversed there will be devices burned and the losses caused by the buyer will be at the buyer s own risk Some buyers think that the power supply is 24V then the input 12V device will not be damaged This understanding is wrong The circuit eventually constitutes the oscillation circuit If the voltage and current are not enough the circuit will not oscillate which will cause the triode to conduct directly to the ground and the triode will burn out About the safety instructions The extremely high voltage will break through the air producing a purple arc which is the ion wind The generated arc will hav