Black 6-18M Outdoor Mist Coolant System Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System

Descriptions: 6-18M Outdoor Mist Coolant System Black Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System Specifications: Material: Brass body with stainless steel orifice Working Pressure: 2-30 Bar Thread Size: 10-24UNC Color: Black Size: Standard water tap adapter: Thread Size:3/4"; Mist hose:1/4"(can work under normal pressure(2-3kg)) Type(Length) Included 6M Misting System - 3M water supply hose - 3M spray tube with 6pcs spray seats and 6pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 20pcs cable ties - 20pcs clamps 9M Misting System - 3M water supply hose - 6M spray tube with 11pcs spray seats and 11pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 30pcs cable ties - 30pcs clamps 12M Misting System - 3M water supply hose - 9M spray tube with 16pcs spray seats and 16pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 40pcs cable ties - 40pcs clamps 15M Misting System - 3M water supply hose - 12M spray tube with 21pcs spray seats and 21pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 50pcs cable ties - 50pcs clamps 18M Misting System - 3M water supply hose - 15M spray tube with 26pcs spray seats and 26pcs misting nozzles - 1pcs faucet connector - 1pcs stopper - 60pcs cable ties - 60pcs clamps Instruction: 1. Connect the Facuet adapter to the water tap; 2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities; 3. Screw the misting nozzles to the Tee fittings, except the last one on the end plug; 4. Turn on the water tap to wash the system for 2 minute to insure that system is fully purged; 5. Turn the watet off and install the last nozzle into the fitting with the end plug; 6. Fix the misting line by the saddle clamps provided; 7. Turn on the tap slightly until jets are working, enjoy the cooling misting system; 8. Periodically remove the misting nozzles, and follow steps 2-5 to clean out the misting system. Features: - Widely used in factory humidification, cooling, disinfection, dust fall, landscaping, salt fog test, and other artificial fog; - The nozzle use American precision punching device, The aperture is about 0.3mm, well-made, compare the using costs and gas humidification, able to save more than 10 times; - The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better; - This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and good effect; Stainless steel spray sheet is processed by advanced forging technology, strong durability, the working life is about 2.5 times compared with similar products. Package Included: 1 Set x Misting System More Details: