50x Aluminum Solution Welding Flux-Cored Rods Wire Brazing Rod 1.6MM X 33CM US

feature: 1. Wide range of applications-suitable for alloys with high welding or surfacing strength good forgeability and good corrosion resistance. 2. High-quality materials-made of aluminum non-toxic tasteless and durable. 3. No need for solder powder-no need to use other flux powder with aluminum alloy as the core and coating as the base. 4. Application-including welding filler wire and flame metalized welding wire. It is also used for argon arc welding and filling materials of pure aluminum and for connection with aluminum busbars and guide rods in electrolytic aluminum plants as well as power chemical food and other industries. 5. Perfect welding effect-due to the powder inside the product it has good weldability and corrosion resistance high thermal conductivity high electrical conductivity and excellent processing performance so the design has a full and smooth welding effect. Specification: Material: Aluminum Quantity: 50pcs Length: 33cm Diameter: 1.6mm/0.06inches usage: 1. Clean and polish the physical surface. 2. Heat the surface of the metal material until the temperature of the wire reaches the working temperature of 380°C to 400°C. 3. When repairing thin aluminum heat the aluminum base material to a suitable working temperature and then use the welding wire to friction and melt to form a weld. 4. Small parts are welded with propane gas and large parts are heated and welded with industrial gas or induction heating device and they are naturally cooled after welding. Please note: 1. The thicker the sheet the harder it is to heat so it is important to use a reasonable heat source. 2. As long as the surface temperature of the base metal reaches the working temperature of the welding wire welding can be started. 3. When using oxyacetylene welding neutral flame welding should be used but please do not burn the welding wire directly. 4. Applicable heat source: such as propane oxyacetylene etc. 5. Storage: Please store in a dry and ventilated place. 6. The surface of the base metal must be clean. 7. The temperature of the base metal should reach 400 degrees Celsius including the temperature of the base metal during the welding process should be maintained at 400 degrees Celsius the temperature can be high or low. 8. Due to the difference in lighting and screen settings the actual color of the product may be slightly different. 9. As manual measurement is different please allow slight size differences. 10. Professional use is strongly recommended. The package includes: 50PCS aluminum electrode notes: 1. The actual color of the product may be slightly different from the website picture due to various factors such as the brightness of the display and the brightness of the light. 2. Please allow the data to have a slight deviation from manual measurement.