50CM x 2M AC 220V Far Infrared Floor Heating Film Building Material

Description: 50CM x 2M Floor Heating Film AC 220V Far Infrared Heating Film Specifications: Power supply 230VAC, 50Hz IP Grade IP54 Compression strength 2750V Tensile strength 0.15mp/cm2 Insulation grade B1 Ambient temperature -40~+90Centigrade Radiance 75%~85% Oxygen index >31% Thickness 0.25mm Wavelength of radiation 8~15m The max breakdown voltage 10,000V Melting temperature 110Centigrade Flame retardant rating UL94VO Infrared energy 756.9K/Square meter Adhesive strength 8.0kg/cm2 The max surface temperature 73 Centigrade Size: Item No Width(mm) Thickness(mm) Length(m/roll) Weight (Kg) Electric Consumption (Watt/m) TF-705 500 0.25 2 0.6 110W Power consumption: 1.Only 150W power per square meter. 2.Means full loading: 0.2 kWh. 3.Electric film rated power is 220W/Square meter. 4.When the room reaches the set temperature,the system will enter standby mode. 5.Paved area of 70% of the room can achieve heating requirements. 6.Daily consumption per square meter is about 0.9 kWh. 7.Installed electric film heating system, are relying thermostat control,intermittent work to make the room temperature is maintained constant. 8.According to the test, when the outdoor temperature is -6 degrees Celsius,the indoor temperature want to maintain at 20 degrees Celsius,under the control of the thermostat,electric film per day per square meter of actual working time is 4-8 hours. Saving essentials: (1) An electrical heating system of the room to do better warm insulation,electric film actual working time will be shorter,thereby reducing power consumption.It is more convenient than the boiler and more environmentally friendly. (2) Install thermostats in each room, separate control.Close heating system when no body in the room,thereby reducing the working area, to save power.It is the same principle with central air condition, but more comfortable Packing included: 1 x Heating film (No accessories)