42cm Dent Puller Slide Hammer T Bar for Car Paintless Dent Removal Hail Repair

Descriptions 42cm Car Dent Puller Slide Hammer T Bar for Paintless Dent Removal Hail RepairSpecifications Hammer Lifter Repair ToolMaterial Stainless steelColor SilverLength 42 0cmWidth 12 0cmGlue Pulling TabsMaterial PlasticColor Blue RedBlue Glue Pulling Tabs size 40mm 35mm 32mm 25mm 19mm 15mmRed Glue Pulling Tabs size 48mm 40mm 32mm 31mm 24mm 8mmFeatures Stainless Steel Adjustment knob Come with 12 different sizes puller tabs Designed to repair auto body small damage easily by manual operation It is environmental protection and does not damage the original paint How to use the repair kits1 Clean the dent with a clean wet cloth 2 Mount the glue stick into the glue guns pull the trigger to let the glue stick enter into the glue guns connect the power source and preheat for 5 minutes 3 Use a proper drawing gasket Large dent requires a large drawing gasket Note The larger thedrawing gasket is the larger the drawing force is 4 Pull the trigger and apply the drawing gasket with extruded glue The 4 holes of gasket should be applied with hot melt glue 5 Fast place the drawing gasket with hot melt glue at the center of dent press lightly until the glue cures and adheres Let the glue cool for about 8 minutes The cooling time should be less than 10 minutes and should be shorter slightly in winter 6 Align the T shaped repairer and press the drawing gasket with hot melt glue pull the sliding rod backwards to pull up the dent 7 Check with a Line board If d