220V 75W 100W 150W Heavy Duty Soldering Iron Chisel Point Electronic Maintenance

Specification :Material: IronChisel Point tip: Copperhandle: WoodenInput voltage: AC 220VOptional Power: 75W/100W/150WTemperature range: 450-600℃Soldering iron Length: 290mm, 275mm, 260mmWood handle length:130mmChisel Point tip: 14mm, 12mm, 10mmCable length: approx.1.1mUses: Electronic maintenance productionInstructions for use:1. Before using the soldering iron, check whether the voltage matches.2. Soldering iron should be kept dry, is strictly prohibited in the wet use.3. The new soldering iron in the initial use, due to electric heating elements may beproduce heat a little smoke, as a normal phenomenon, will soon disappear.4. Fever after a few times to remove the tip, remove the oxide layer, avoid long timeoxide layer blockage couldnt take out the welding head.5. Do not replace the parts under power.6. In order to improve the life of the tip, please use environmentally friendly, low acid, halogen-free flux products.7. When the tin does not stick, using fine sand skin polishing welding Tsui, and then infiltratedby flux on the tin; when no tin, the tip control about 250 temperature in the best.8. The use of voltage 220V 10% AC, in the use of soldering iron before, should distinguishbetween power and grounding wire whether connect right.Package includeds :1 x Soldering iron heavy duty chisel(75W/100W/150W)Come with an adapter according to your country~Details pictures :