220V 40W Power Supply for CO2 Laser Engraver Cutter Engraving Machine Router

Specification: AC Input Voltage AC220V AC Input Frequency 47~440Hz Voltage Output 30KV Maximum Current 20mA (depending on the laser tubes of different manufacturers) Efficiency 92% Overcurrent Protection 130% of maximum current Open Circuit Protection Yes (short term) Structure Fan cooling High Electric Level Control Voltage Range =3V Low Electric Level Control Voltage Range =0.6V Working Temperature -30C~+65C Relative Humidity 20~85%RH (no condensation) Insulation Resistance 50M (DC500V) Earth Leakage Current 1mA(AC220V) 0.5 mA(AC110V) Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours MTBF 30,000 hours Test Time at Full Load and 60C 12 hours Features: 1. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life. 2. Easy control: the start and stop of laser can be easily controlled by TTL level. 3. The power supply has output open circuit protection. 4. The power supply has TTL signal indication, water through signal indication and laser output indication. Package Included: 1 x CO2 Laser Power Supply