20x20mm ARF4-3AOM Flytower Omnibus F4 Flight Controller AIO OSD BEC & 28A BLheli_S ESC for RC Drone

20x20mm ARF4-3AOM Flytower Omnibus F4 Flight Controller AIO OSD BEC & 28A BLheli_S ESC for RC Drone Specification: ( FC Manual ) Item Name: 20x20mm F4 Flight Controller & 28A 4 In 1 ESC Flytower Model: ARF4-3AOM Omnibus F4 Flight Controller ( Top Level) Item Name: Omnibus F4 Flight Controller AIO OSD BEC CPU: STM32F405RGT6 Sensor: MPU-6000 (connected by SPI) Firmware: betaflight_3.2.0_OMNIBUSF4SD - Built-in Betaflight OSD - Built-in 5V 3A BEC - Built-in LC Lilter, support DShot ESC Input Voltage: 2-4S Size: 27x27mm Mounting Hole: 20x20mm ( M2.5) Weight: 4.0g - Support SBUS/IBUS/PPM/DSMX Receiver - Support 3.3V Spektrum Satellite Receiver Application: for 150mm Frame Kit Receiver Setting: - DSM2/ DSMX receiver, Choose RX1 and use 5V Pad - SBUS receiver, Choose RX6 - SBUS/ IBUS/ PPM receiver use 5V Pad Features: -PPM/SBUS/DSM2/DSMX input -LED_STRIP solder pin -Buzzer solder pin -With LC filter -Built-in betaflight OSD -Built-in voltage detection, alarm -Support the DSHOT ESC -Support programmable LEDSD (turn off transponder before using) -Support BLheli suite -Special design with plug connector. You can connect it by cables directly, do not need solder the cable. 28A BLheli_S 4 In 1 ESC ( Bottom Level) Con. Current: 28A ( Per ) Peak Current: 35A ( 5S) Firmware: BLHELI_S Input Voltage: 2-4S Lipo BEC: NO CPU: SILABS EFM8BB21F16G MOS: AON7418 Size: 27x32mm ( Including Pad) Mounting Hole: 20x20mm Weight: 4.1g - Support PWM, Multishot, Oneshot and DShot Package Included: 1x Omnibus F4 Flight Controller 1x 28A BL_S 4 In 1 ESC 1x 1.0mm*6P Connection Cable 8x M2*5 Nylon Standoffs 4x Screw Nut 1x XT30 Connector Cable 2x 3P Cable 2x 4P Cable