16x16mm TeenyF4 Pro 1-2S Flytower F4 OSD FC w/ Buck-Boost Converter & 5A BL_S DShot600 4In1 ESC

16x16mm TeenyF4 Pro 1-2S Flytower F4 OSD FC w/ Buck-Boost Converter & 5A BL_S DShot600 4In1 ESC Specification: Flight Controller: ( Top) Item name: TeenyF4 Pro flight controller board Model: TeenyF4 Pro Processor: STM32F405RGT6 Sensor: MPU-6000 ( connected by SPI) Firmware Version: betaflight_3.2.0_OMNIBUSF4SD - Built-in betaflgiht OSD - Built-in Buck-Boost Converter Input Voltage: 1-2S Lipo Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc. Size: 20*20mm Mounting hole: 16*16mm Mount Hole Diameter: 2mm ( M2 ) Weight: 2.2g Application: for Micro FPV brushless drone 5A 4 in 1 ESC: ( Bottom ) Item Name: Teenypro 4 In 1 5A BLHeli_S ESC Mode: Teenypro Input Voltage: 1-2S Lipo Con. Current: 5A Peak Current: 7A (5S) Firmware: BLHELI_S Processor: SILABS EFM8BB21F16G BEC: NO Size: 23x27mm (includes solder pad) Mounting Holes: 16x16mm (M2) Weight: 2.1g Firmware Target: BLHeli_S S_H_50_REV16_7 - Support Dshot150 Dshot300 Dshot600 Oneshot125 Multishot PWM Features: - Support programmable LED_strip - Support BLheli/BLHELI_S suite Pass-through ready - Support PPM, Oneshot125,Oneshot42,Multishot, Dshot150, Dshot300, Dshot600 - Default Dshot600 - Built-in voltage detection, alarm - Built-in Betaflight-OSD - Buzzer solder pin - LED_STRIP connector Setting Notice: - SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, and enable Serial_RX - PPM receiver don't need to enable Serial_RX - DSM/DSM2/DSMX receiver power from 3.3V - SBUS and PPM receiver power from 5V Package Included: 1x F4 Flight Controller Board 1x 5A 4 In 1 ESC 1x 6P Cable 8x M2*5+5 Nylon column 8x M2 Nuts 8x M2 Screw