Universal Car PKE Keyless Entry System Engine Push Start Button Remote Control Alarm System

Fitment As long as it is a 12V car the original car can be installed by turning the key except for some high end cars Product Description Material PlasticEngine start stop Size 5cmHost Size 7x6x3cmWorking Voltage 12v 2VWorking Current 6mARemote control frequency 433MHZReceive frequency 433MHZFeatures Audible alarm High quality high quality wiring harness to ensure smooth operation of the current Remote operationLong press the lock button for 5 seconds start the vehicle remote control but also remote flameoutIntroduction to Startup KeysMaterial Use conductive adhesiveMaximum outside diameter 40mmButton Thickness Internal lighting blue red and yellow4 conductive contacts do not use the current old mechanical key switch the use of the effective number of 30 million times without replacementInstallation method 1 directly remove the lock and use the buckle of the installationInstallation method 2 Remove the button behind the iron using the paste installation methodRemote start function 1 To ACC ON file first power supply and then start the car2 Long press 5 seconds to start the remote control button3 Remote start detection handbrake do not pull the hand brake remote start is invalid 4 10 minutes after the start of remote control without operation is automatically turn off the brake on the car to stop the flame function is canceledSensing mode switching function Method 1 Open the ACC bar first2 At the same time press the remote control unlock key a