STARTRC DJI Ronin RS 2/RSC 2 Handheld Five-axis Z-axis Shock-absorbing Stabilizer Handheld Stand

Features The Z axis shock absorber adopts the design scheme of oil pressure assisted fine tuning According to different loads and different use environments fine tuning of oil pressure rebound can be carried out to have a more shock absorbing effect The Z axis shock absorber adopts an adjustable and replaceable spring tension design and comes with 3 sets of springs with different load bearing capacity 1 Pre installed 2 3kg 4 5kg spring 1 2 3kg spring included 2 Spring load range adjustment knob3 Movement oil pressure damping adjustment default position is undamped state The new Z axis shock absorber adopts a split design and the arm body can be disassembled and split which is convenient for shooting upside down There are 1 4 screw holes on the side of the middle clamp and the handle to install accessories such as shoulder straps strange hand expansion lights microphones and monitors Installation Steps 1 Install the corresponding model stabilizer fixture2 Lock the fixture3 Click into the damping arms on both sides and press the lock4 Lift both hands to observe the spring tension5 Adjust the load bearing tension until it is level6 This knob can adjust the motion damping of the arm body the default is no damping stateSpecifications Brand STARTRCModel ST 1106967 ST 116969Package Weight 1730g without shoulder strap Net weight 1451g without shoulder strap Material ABSPacking size 43x21 5x10 3cmPackage Weight 1887g with shoulder strap Net weight 1610g