RadioMaster T8 Lite V2 2.4GHz 8CH CC2500 D8 D16 V1 Protocol Potentiometer Sensor Gimbal USB-C Charging Radio Transmitter

RadioMaster T8 Lite V2 2 4GHz 8CH CC2500 D8 D16 V1 Protocol Potentiometer Sensor Gimbal USB C Charging Radio Transmitter for RC DroneDescription Manual Brand Name RadioMasterItem Name T8 Lite V2 TransmitterModel T8 Lite V2Mode Mode1 Mode2Size 160 130 45mmWeight 218gFrequency 2 400GHZ 2 480GHZRF Module CC2500Protocol Options D8 D16 V1Transmission power 20dbmAntenna gain 2dbRange 1km 20dbm depending on the receiver Battery Built in 3 7v 1000mah Lithium batteryCharging Built in USB C chargingFirmware Independent development systemChannels Up to 8 channels depending on the model receiver Gimbal High precision quad bearing potentiometer sensor gimbal Does not support OpenTXBind mode for D8 protocol receivers 1 Turn on the transmitter and keep the throttle at its lowest position Press and hold the bind button for longer than 1 second the transmitter will start beeping in a beep beep beep pattern signaling D8 mode If the transmitter beeps in a beep x2 beep x2 beep x2 pattern this means the transmitter is in D16 mode and the bind button should be pressed momentarily to return to D8 mode 2 Power on the receiver press the bind button on the receiver within 3 seconds to enter bind mode on the receiver 3 The red light on the receiver will flash signaling that the unit has bound successfully Turn the receiver off and on again for the unit to function correctly Bind mode for D16 protocol receivers 1 Turn on the transmitter and keep the throttle at