RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with Shell

Description This amplifier has the advantages of wide frequency range high gain low noise figure etc It can be used in various radio frequency receiving front ends to increase the communication distance Wide range of shortwave FM broadcasting remote control receivers cable TV signal amplifiers and other places where low noise and small signal radio frequency amplification is required Specification Working frequency 0 1 2000MHzWorking voltage 9 12V suitable for lithium battery power supply Working current 37mAAmplification gain 32dB typical value F 0 1MHz gain 32dBF 500Mhz gain 32dBF 1000MHz gain 29dBF 1500Mhz gain 25dBF 2000MHz gain 20dBMaximum output 13dBm 20mW Noise figure 1 9dBSystem impedance 50 ohmsConnector model SMA K female outer screw and inner hole Product size 42 36 14MMProduct weight 50 gramsHow to useRFin Input signal amplificationRFout output amplified signalVCC Positive power supply suitable for lithium batteries GND negative power supply1 The amplifier has very good gain flatness when the frequency is less than 500MHz and careful adjustment can be less than 1dB The lower the frequency the higher the gain consistency 2 The lower limit of the operating frequency of this amplifier is restricted by the input and output capacitors The default is 0 1uF which can work up to 0 1MHz the input and output capacitors can be increased appropriately to extend the lower limit of the frequency For example at 10uF it can work up to 5KH