JZ-TS24 2.4 inch LCD Touch Display Screen+MKS-GEN L V1.0 Mainboard For 3D Printer

MK S GEN L MainboardOverview Aiming at the problems exist on the open sourced controller board such as Ramps 1 4 the developers in Makerbase specially optimize and develop a new product MK S Gen L which provides more flexible choices for users Features 1 2560 and Ramps 1 4 are integrated in the board which avoids the complicated connectors 2 Support a variety of stepper drivers such as A4988 DRV8825 TMC2100 and LV8729 available to change the stepper drivers and motors as users like 3 Reserve external driver signal available to connect external high current driver to drive the 57 and 86 stepper motors 4 Use high quality MOSFET better cooling and more stable 5 Use specific power chip support 12V 24V power input and resolve the problems of chip heating and power shortage 6 Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing 7 Use CH340 serial port chip more easily install the drive than 16U2 8 Run Marlin firmware the configuration is completely same as Ramps 1 4 and available to directly replace the Ramps 1 4 9 Support Ramps 1 4 2004LCD 12864LCD TFT28 and TFT32 10 Available to input 24V the heated bed current can be reduced to 1 4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats 11 X axis Y axis and Z axis with different color terminal controls the stepper motors and endstops which is convenient to wire 12 Plug the stepper driver