Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Features: 60MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph. 1M Memory Depth. High Refresh Rate (2500 frames). Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform. Easy-to-use pop-up menu with built-in multi-language help system. 32 Automatic Measurements. Waveform Math: Add, Subtract, Multiply, and Divide. Store and recall over. Automatic cursor tracking measurements. XY Mode. Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems. Waveform Recorder to capture/r eplay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames. Pass/Fail function compares a stored waveform to an unknown input. Average Mode for smoothing waveforms. Square Wave Output (2V, 1kHz) for probe adjustment. USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance. Dimensions (mm): 240(L) x 165(W) x 50(H) be carried easily Specification: Model DSO1202B DSO1102B DSO1062B Oscilloscope mode Bandwidth 200MHz 100MHz 60MHz Real-time Sample Rate 1GSa/s Equivalent Sample Rate 25GSa/s Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512k SEC/DIV Range 2nS/div-2000S/div (in a 2, 4, 8 sequence) Delay Time Accuracy 500ps Vertical A/D Converter 8-bit resolution VOLTS/DIV Range 2mV/div5V/div at input BNC Position Range 50V(5V/div) 40V(2V/div500mV/div) 2V(200mV/div50mV/div)400mV(20mV/div2mV/div) Rise Time at BNC 1.7ns 3.5ns 5.8ns DC Gain Accuracy 4% for Sample or Average acquisition mode, 5mV/div to 2mV/div 3% for Sample or Average acquisition mode, 5V/div to 10mV/div Trigger Trigger Sensitivity (Edge Trigger Type) DC: CH1/CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full EXTTypical 200mV from DC to 40MHz EXT/5Typical 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity Trigger Level Range CH1, CH2: 8 divisions from center of screen EXT: 1.2V EXT/5: 6V Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times 20ns) CH1, CH2: (0.3divV/div) (within 4 divisions from center of screen) Holdoff Range 100ns-10s Trigger Type Edge Trigger on the rising or falling edge Pulse Width Trigger (when >,,